The D6100 does not support a Conettix Failover Solution. The Conettix Failover Solution requires that the backup receiver has one Ethernet device configured with the same MAC address as the primary receiver, and a second Ethernet device configured to be on the network at the same time as the primary receiver. Because the D6100 only supports one Ethernet connection and it is the built in Ethernet adapter, a failover solution is not possible.
All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights.
This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.