How to enter 26-bit card format into the (AEC1.0) programming?

[#1]

The AEC1.0 has the Standard 26-bit format configured by default.  However, if it is edited or deleted, it can be reset by performing this procedure:

1. Browse to Panel Admin >> Panel Setup >> Card Format.
2. Select Standard 26-bit card format or an Undefined card format.
3. Enter the following text into the appropriate fields as shown below:
   Card Encoded Format: PFFFFFFFFCCCCCCCCCCCCCCCCP
   Parity Format 1:  BBBBBBBBBBBBBXXXXXXXXXXXXO
   Parity Format 2:  EXXXXXXXXXXXXBBBBBBBBBBBBB
4. Leave all other parity format fields empty.
5. Click the disk icon to save your changes.