Resetting the AMC2 (if application software is loaded)
· Insert the provided screwdriver into the hole as described in manual.
· Push the reset button for at least three seconds.
· The AMC2 will be reset and reboots. You are back in the download program.
· Now it is possible to reconfigure the AMC2 4W from the beginning.
Resetting the AMC2 (force, even if no application software is loaded)
· Switch power supply off
· Insert the provided screwdriver into the hole as described in manual.
· Push the reset button
· Switch power on
· Release the reset button
· The AMC2 4W will be reset and reboots. You are back in the download program.
· Now it is possible to reconfigure the AMC2 4W from the beginning.
Resetting the network configurations of AMC2:
· Reset the AMC as described above (in download program)
· Open the upper case of the AMC2 4W as described in Section 5.3. Opening the AMC2 4W Case.
· Set all six DIL switches of the RS-485 selector to ON
· Press the tamper switch on the upper left side of the board
Notes:
- The AMC2 4W will now have the following network configuration:
• DHCP = 0
• IP = 127.0.0.1
- The configuration password (used with AmcIpConfig) will also be resetted
- DIL switches during normal operation:
1 ON
file:///C/Users/lsr9fp/AppData/Local/Temp/Reset%20AMC2%20to%20factory%20settings.html[5/21/2018 11:31:23 AM]
2 OFF
3 OFF
4 OFF
5 ON
6 OFF