Issue
A serial connection is needed but the distance between the devices is to far for a serial cable.
Solution
These are the channel 1 settings for using 2 UDS-10s to make a serial tunnel over a TCP/IP network:
UDS10 Settings for a Serial Tunnel
UDS-10 #1
Baudrate 9600
I/F Mode 4C
Flow 00
Port 10001
ConnectMode C5
Auto Increment Source Port N
Remote IP Address 10.10.10.10 (this is the IP of the 2nd UDS-10)
Remote Port 10001
DisconnectMode 00
FlushMode 00
DisConnTime 00:00
SendChar 1 00
SendChar 2 00
UDS-10 #2
Baudrate 9600
I/F Mode 4C
Flow 00
Port 10001
ConnectMode C0
Auto Increment Source Port N
Remote IP Address 10.10.10.20 (this is the IP of the 1st UDS-10)
Remote Port 10001
DisconnectMode 00
FlushMode 00
DisConnTime 00:00
SendChar 1 00
SendChar 2 00
