Issue
Command 4 function on the 8112.
Solution
- Reset Trouble Sounder
- Reset Alarm Memory Display
- Display Clock
COMMAND 4 performs several functions for your securitysystem. Use this command to silence your Alpha II steady troubletone during system trouble events or clear the alarm memory displayof the Alpha II Command Center.
Your security system may be programmed with an internalclock. To display the clock momentarily at the Alpha II CommandCenter, enter COMMAND 4. The display will showTEST= (time display) . If the display showsTEST= without the time display, then yoursystem is not programmed for clock displays. All other functionsof COMMAND 4 are still available.
To use COMMAND 4:
- Ensure that your security system is disarmed.
- Press the COMMAND bar. The display should show SYSTEM COMMAND
- Press the 4 key. The display should showTEST= (time display) momentarily. If the displayshows TEST= , with no time display,your system is not programmed to indicate time of day.However, resetting the trouble sounder and clearing the alarmmemory display still remain functional.
Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2
