Security: Intrusion

How to troubleshoot problems with popits and Zonex. D7212B, D7212B1, D9112, D9112B, D9112B1, D9127,D8112, D8128A, D8112B, D8128C, D8128D, D8125

Best practices to download and Install Remote Programming Software (RPS).

Issue The D8112 panel is not sending signals when modem format is selected to the Central Station. Solution Only the D8112G2 can send signals in Modem II format with a CS setting of 7. The D8112E, D8112E1, D8112G, D8112G1 and D8112A must have CS set to either Blank or a selection between 1 and 6 but not 7. Only Modem Format can report a 4 digit account number to the Central Station all others only report a 3 digit account number.

Issue How many zones can be programmed on the D8112G2?   Solution   The D8112G2 is capable to have 8 master zones that may be expanded to 134 individual zones of protection.

Issue   How many codes can be programmed for the D8112G2?   Solution   The D8112G2 can be programmed with up to 70 individual combinations.

Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2

Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2

  Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D192A, D192C

Issue What are the enviromental considerations for the proper operation of the Bosch control/communicators? Solution Indoor Dry.   Relative Humidity 5% to 85% noncondensing at +86 degrees Fahrenheit (+30 degrees Celsius). Operating temperature would be +32 degrees Fahrenheit to +120 degrees Fahrenheit ( 0 degrees Celsius to 49 degrees Celsius ).

Issue How many Logger Events can the D8112G2 store?   Solution   The D8112G2 Control Communicator can store up to 400 Events in the panel memory. The panel logs the time, date, event, master zone, and the primary or alternate phone number called for each event. The 400 events can be retrieved with the RAM II, RAM IV or RPS downloading software.

Issue How many Skeds can be programmed with the D8112G2 Control communicator?   Solution   The D8112G2 can be programmed with up to 64 skeds.

Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D8105E, D8105E1, D8105G, D8105G1, D8105G2, D8105A

Issue Why does the zone light on the D360 Command Center light when the D279A is disarmed? Solution The D8112 panel is programmed with a zone code of 3271 on a particular zone. The purple jumper on the D279A is cut. As a result, the D360 zone light illuminates when the D279A is disarmed. This is normal and will not impact the D8112 arming process.  If the D1252A is used, the disarm state of the D279A is not indicated.

Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2

How to correct the D8112/5505 not sending a Reboot report. The 8112/5505 panel is communicating alarm and trouble signals but after resetting the panel it does not report the reboot.  5505,D8112A,D8112E1,D8112G1,D8112G2

How to program a zone to activate Alternate Alarm. D8112G2,D8112E1,D8112G1,D8112A.

  How to report a four digit account number with the D8112. D8112E,D8112E1,D8112G,D8112G1,D8112G1,D8112G2  

How to set configure the D8112 to pulse the bell output on a fire alarm. D8112A,D8112E,D8112E1,D8112G,D8112G1,D8112G2

How to control the D8112 buzz when test reports are sent. The D8112 panel buzzes when it sends test reports, how can I stop the buzz? D8112G2,D8112E1,D8112G1,D8112A