- In a system with multiple areas assigned to one keypad, and there is a need to either arm or disarm all areas independantly, the disarm command must be added to the function list.
- When attempting to disarm an area from a keypad that is assigned to an associated area, the area rearms when using a passcode. How should I disarm the area?
- In the function list, assign a 1 (Disarm) to menu item #1 and turn this feature on for the appropriate CC address.
- When disarming an area from a keypad that is assigned to an associated area, press the Escape key and press Enter at Disarm.
- Enter a valid passcode that has authority over the area to be disarmed.
- The keypad shows the area to be disarmed. If this is the correct area, press Enter. If not, press the Next key until the desired area is shown.
In a system that utilizes only one keypad for multiple areas, make sure that in command center assignments the scope for the keypad is set to Custom and all associated areas are included.
