Automatic Test Reports are initiated on 2000 Series control panels at the end of the combined 'Hours to Next' and 'Minutes to Next' settings in the Test Timer area of programming.
The system will adds the entries in the Hours to Next and Minutes to Next parameters and waits that period before it sends the next test report to the receiver. From that report on, the system sends reports at the interval set by the Test Interval parameter.
The time period count-down begins at the moment the panel is reset after sending the program changes.
The Test Interval parameter provides settings for:
No Report: This selection disables the test report feature.
1 Day: This selection transmits test reports every 24 hours.
7 Days: This selection transmits reports every 7 days.
28 Days: This selection transmits reports every 28 days.
