How to make Custom Text display after replacing the keypad.

[#1]

This solution is to resolve the issue where previously programmed custom text does not display after replacing an LCD keypad.

To replace an LCD keypad set at address 1 that has custom text:

1. Obtain a copy of the panel program, using a D5200
2. Attach the new keypad to the panel
3. Send the copied program back to the panel

•  If LED keypads and LCD keypads are on the same system, the LCD keypad must be at address 1 for this change to take into effect.

D2212, D2412, D2812,Custom Text, D223,D222, Remote Programming Software, D5200