How to set the date and time on the DS7400 series panels.

[#1]

 To set the Date:

1. Enter the Master Code Programming Mode. [Master Code] + [#] [0] “2 Change Date” (display will scroll to this).
2. Enter a [2] “Enter Month” (01 … 12).
3. Enter the Month, [0][1] through [1][2] (January through December) “Enter Day” (01 … 31).
4. Enter the Day, [0][1] through [3][1] “Enter Year” (XX). End with [#].
5. Enter the Year. The last two digits of the year followed by [#]. “Month, Day, Year”. A long beep signifies acceptance.

To Set the Time:

1. Enter the Master Code Programming Mode. [Master Code] + [#] [0] “2 Change Date” (display will scroll to this).
2. Enter [6] “Enter Month” (01 … 12).
3. Enter the Day. [1] through [7] Sunday Saturday “Enter Time” (0100 … 1259).
4. Enter the Time. (Hour and minute) [0][1][0][0] through [1][2][5][9] “Enter AM\PM” (4/6). End with #.
5. Enter AM or PM. [4][#] or [6][#] (4 = AM, 6 = PM) “Day - Time” A long beep signifies acceptance.