Transmit Test Report
Testing the communication link between your security system and the Central Station is an important part of maintaining high level of security for your property. The Command Center minimizes the time and trouble of testing by allowing you to send a special test signal just by pressing three keys. Arming the system is not necessary, however you should always call the Central Station before transmitting a test report.
To use COMMAND 41:
1. Ensure that your security system is disarmed.
2. Press the COMMAND bar. The Command Mode indicator light comes on.
3. Press the 4 key, and then press the 1 key.
4. After the report is received at the Central Station, the Command Center will emit a beep tone for two seconds. This is to confirm that the test signal was properly transmitted and received.
