How to use the RF3341 Keypad on a D4412/D6412 Panel.

[#1]

• Note: The instructions printed on the back of the RF3341 is specific to the DS7400 series and does not pertain to D6412/D4412 panel types.
  

  The following commands used with the RF3341 keypad using the RF3224 receiver on the D6412/D4412 panel are as follows:

  •  PIN + #1 will arm ALL ON
  •  PIN + #2 will arm PART ON
  •  PIN + #3 will arm PART 2 ON
  •  PIN + # will disarm the system
  • A, B, and C keys will operate per panel programming with a single press and hold till beep on the RF3341.
  •  All other functions do not apply to the D6412/D4412 panel using the RF3224 receiver.