About mnk3lio

Question   How can I reset the ADHB-4 if I can't access it from the web page?   Answer   From the front panel of the ADHB-4 press "System Tools", when you see the system info screen press the gray buttons in one of the following orders: To reset only the password the code is 1131213 To reset the unit to factory the code is 3112312 Button 1 is the far left with 4 being the far right, when you have entered the correct sequence the display will ask if you want to reset defaults, enter "Yes"           © Copyright Bosch Security Systems All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights. Warranty Note This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.   ... View more

Question   Are there Electro-Voice Microphone options for Dispatch Consoles?   Answer   See attached                 © Copyright Bosch Security Systems All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights. Warranty Note This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.   ... View more

Question   How do I reload the ADHB-4 device drivers? What do I do when I see an exclamation point on the ADHB-4 in the device manager?   Answer   This document was written for ones that have knowledge of PC's and how to use them. If you feel uncomfortable performing any of these tasks please call us at 1-800-898-6723 or your local I.T. Professional. To reinstall the driver you will need to have at least C-Soft version 5.400 installed on your PC. 1. Unplug the ADHB-4 USB cable. 2. Go into the Device Manager and uninstall the ADHB-4 driver (listed under Universal Serial Bus Controllers) 3. Restart the PC. 4. Go back into the Device Manager and see if the ADHB-4 driver is present. If not then continue. 5. Plug the ADHB-4 USB cable back into the PC. 6. The PC should have seen the ADHB-4 and installed it. If there is an exclamation point that popped up then please continue. 7. Right click on the ADHB-4 with the exclamation point. 8. Click on Update Drivers. 9. Click on Browse. 10. Navigate to C:\Program Files\Telex Communications\C-Soft\usb_drivers\Winusb_vista-7\ 11. Click on Next 12. Now the PC should have found the driver. The ADHB-4 should now be reinstalled and the ADHB-4 should be working properly. If you have questions feel free to contact us at 800-898-6723 or email us at telexdispatchtechsupport@us.bosch.com             © Copyright Bosch Security Systems All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights. Warranty Note This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.   ... View more

Question I can't hear NENA RX audio in my headset, why?   Answer   To fix this issue you need to add a NENA volume control to your C-Soft design: Open your C-Soft design in C-Soft designer. Right click on a empty space in your csoft design. Click on Add UI Vol. Control Right click on the volume button that you just created and click on properties. On the UI Element Function drop down window, select Volume-NENA. Now Click on the Vol. Control Tab. Make sure the Maximum gain is set to 12dB. Click on ok. Save your C-Soft Design. Now Run C-Soft and test your NENA audio. You now can control how loud your NENA audio is.           © Copyright Bosch Security Systems All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights. Warranty Note This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.   ... View more

Question   What can the NEO-10 do?   Answer   The Telex NEO-10 is a versatile network I/O device that integrates perfectly with a C-Soft console as the control and monitoring device. The NEO-10 contains 10 C form DPST relays with all 6 contacts of the relays brought out to external connections on the unit (Normally Open, Normally Closed, and Common). There are also 10 diode blocked inputs, which can be used to monitor logic levels (0-18V) or external switch contact closures.  Input statuses can be displayed as buttons on the C-Soft console which change colors and text with state changes.   Input Annunciation - C-Soft can also be programmed to annunciate an input state change via an alert tone or .wav file playback, upon receipt of an input state change from any of the ten NEO-10 inputs. The NEO-10 sends out multicast packet bursts to the consoles, any time an input state changes, and of course packet bursts from the console control output relay closures.  Actual control of the NEO-10 is accomplished by a TCP/IP socket connection from the controlling console. Version 5.3 of C-Soft and above, supports control and monitoring functions for multiple NEO devices on the network.   Echo Packets - Later releases of software for the desktop VoIP capable consoles will support NEO-10 as well. In addition to the I/O functions of the device, the NEO-10 supports 10 channels of echo packet functionality. Echo Packet is a method of copying voice/data content on the network to and from multicast addresses. These features allow the Telex multicast scheme to operate on a network without having multicast enabled. Automatic Relay Control - Relays can be programmed to be automatically triggered by the receipt of an Emergency from a field unit, an incoming phone call, or a PTT on the console.  Typical Input Devices - Any switch closure can be used to trigger an Input Message to the console. Door lock and closure switches, alarm circuit outputs, temperature limit switches, remote monitoring of radio site equipment (low transmit power alarms, receive antenna preamp failure, high temperature alarms, power failures, etc.), Typical Output Applications - The NEO-10 can provide remote control of overhead doors, electric door locks, lighting, radio site equipment, generators, security system activation, etc. Often it is advantageous to use a NEO-10 input to verify an output function, such as a remote door lock, monitored by an input position switch, to confirm that the door has been returned to a closed and locked condition, etc. The relay contacts are rated 1.0 amps at 125 volts.             © Copyright Bosch Security Systems All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights. Warranty Note This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.   ... View more