How to see the labels of the sensors in FSM which are configured in RPS?

[#1]

To see the labels from the sensors in FSM which are configured in RPS follow the steps inserting a new sensor:

Step-by-step guide

1. Insert a new sensor at the map (design mode)
2. Then decide which detector address should be used
3. There will be a question if detector name should be changed to e.g. "detector 5058.1 (Test label)" -> this has to be accepted!
4. After modifying the map go back to normal mode. By moving over the detector there will be the full detector information (number and label).