Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎01-19-2024 01:25 PM
    In the controller history, you can see entry as detailed below, showing Detector -On- 14 , what does this indicate?
    View full article
    ‎01-19-2024 01:17 PM
    The following steps describe an efficient way to update the panel firmware in an AVENAR panel 4.x network via SD card, thus keeping downtime of the panels to a minimum. To further reduce downtime, it is recommended to network the panel nodes via ETH.
    View full article
    100% helpful (1/1)
    ‎12-20-2023 03:57 PM
    The table below shows the current FSM, FSI and MPC versions compatibility:  
    View full article
    ‎11-20-2023 09:02 AM
    In the event of flames and smoke, the camera's built-in intelligent algorithms analyze the scene in real time by concatenating and transforming the input data. Deep learning AI directly analyses the data and if a fire is confirmed, it triggers an alarm and sends a signal either to the fire panel or the Video Management System.
    View full article
    ‎11-20-2023 09:01 AM
    Thanks to the latest AI technology and deep learning methods, the newest generation of fire detection cameras AVIOTEC 8000i IR becomes the best, fastest and more robust option for applications where traditional detectors might find limitations.
    View full article
    ‎11-17-2023 11:06 AM
    AVIOTEC 8000i IR achieves an average of 3x faster detection times compared to current Aspirating Smoke Detectors*.
    View full article
    ‎11-17-2023 11:01 AM
    Typical application areas: Industrial manufacturing; Transportation: airports & railways; Logistics and warehouses; Parking: eMobility
    View full article
    ‎10-31-2023 09:36 AM
    This article provides instructions for troubleshooting Ground Fault in the FPD-7024 or D7024
    View full article
    ‎08-29-2023 10:21 AM
    Do you want to move the license activated on existing computer/server to another computer/server (FSM - Fire Monitoring System)?
    View full article
    ‎08-29-2023 10:12 AM
    In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article
    View full article
    ‎08-21-2023 03:54 PM
    This article indicates where you can find the log files for FSM client and for FSM server
    View full article
    ‎07-19-2023 04:57 PM
    The cause of the error is combination of group address and the text length of the group label as defined in RPS as shown in this article
    View full article
    ‎05-02-2023 10:43 AM
    This article describes how to capture the panel/ controller communication log when requested by Technical support.
    View full article
    ‎05-02-2023 10:08 AM
    Panel controller displays can become de-calibrated, e.g. upon initial power-up followed by unintentional contact with the display or inaccurately touching the crosshairs.  It becomes noticeable after the panel controller has re-booted and does not respond properly to touch.
    View full article
    ‎04-06-2023 03:16 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, D8125MUX, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, B600, B299, D8125, FPA-1000, FPA-1000-V2, FPE-7039, D7039, DS9431, FDP-7024, D7024, DS9400, DS9400I, DS8400M, D10024A, D10024, D9024, D8024, D7212B, D9112B, D7212B1, D9112B1, D7212, DS7430, DS7436,
    View full article
    ‎02-23-2023 09:39 AM
    This article contains the RCP+ CGI commands for AVIOTEC starlight 8000 that helps you to enable or disable the scene quality (bright or dark)
    View full article
    ‎02-23-2023 09:38 AM
    This article contains the RCP+ CGI command for AVIOTEC starlight 8000 that helps you to adjust the VCA darkness or brightness level
    View full article
    ‎11-11-2022 12:07 PM
    This article answer if the labels or texts automatically updated in FSM after change in RPS.  
    View full article
    ‎11-11-2022 12:00 PM
    This article answer to the question: " What is the maximum of simultaneous client connections supported on FSM?"
    View full article
    ‎11-11-2022 11:59 AM
    This article is a step by step guide about how to create panel container on map by using Macro-Area (point) on FMS.
    View full article