Set the DS9400 and 7024 Series FACP to Factory Default

[#1]

Issue

How can the programming on the D7024 be defaulted?

Solution

1. Enter program mode by pressing 0/Prog followed by the programmer's PIN (default is 9876).
2. Choose option 8 - HSTRY DEFLTS.
3. Choose option 2 - DEFAULT EE.
4. Press #/Command to confirm.
5. When the Default is complete power down the panel for 30 Seconds AC & Battery then reapply power.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M