Which is the RCP+ CGI command for AVIOTEC starlight 8000 to adjust VCA darkness or brightness level?

[#1]

Question

Which is the RCP+ CGI command for AVIOTEC starlight 8000 to adjust VCA darkness or brightness level?

 

Answer

The AVIOTEC starlight 8000 camera can send commands via CGI (via HTTP/HTTPS) through WEB Interface and Configuration Manager.

Below is the RCP+ command:

• http://<ip address>/rcp.xml?command=0x0bac&type=P_OCTET&direction=WRITE&num=1&payload=0x005400028270

The red digits are for darkness threshold and green digits are for brightness threshold.

See also: 

• Which are the RCP+ CGI commands for AVIOTEC starlight 8000 to enable or disable the scene quality?