Overview
Unbypassing a point is a way to return a bypassed point to the security system so that it can once again respond to trouble and alarm conditions.
Issue
How do I unbypass a point?
Solution
To unbypass a point:
1.) Ensure the command center is at disarmed idle text.
2.)Press the COMMAND key. The display shows SYSTEM COMMAND.
3.) Press the 0 key, then press the 0 key again. Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Command Menu, then press NEXT repeatedly until you reach the UNBYPASS A POINT prompt. Press ENT.
4.) The display shows ENTER PT NUM.
If you know the point number you wish to unbypass, enter the number and press ENT. A description of the point type is displayed, such as POINT ## @@@@@@ (where ## = the point number and @@@@@@ = point type). Press ENT again.
If you don’t know the number of the point you wish to unbypass, you can view the list of devices that can be unbypassed by pressing the NEXT key without entering any digits when ENTER PT NUM is displayed. Continuously pressing NEXT scrolls through these devices. When the point text of the point you wish to unbypass appears, press ENT.
5.) One of the following messages displays:
PT ## UNBYPASSED indicates the point is unbypassed.
PT NOT BYPASSED indicates that the point had not been bypassed.
INVALID POINT indicates that the device is not assigned to the area that you are in.
24-HOUR-FAULTED indicates that the device is a “24-HOUR-DEVICE” and is currently faulted, and must be returned to normal prior to unbypassing.
FIRST DISARM indicates the area is currently armed and needs to be disarmed prior to unbypassing the point.
NO POINTS indicates that there are no points remaining to be unbypassed.
7.) To confirm that the point is back in the system, press a number key at idle disarmed text and view the scrolling list of currently faulted and bypassed points.
8.) If the point now displays as faulted it will not completely return to the system until the door or window is shut.
9.) If the unbypassed point was the last bypassed 24-hour or fire point, the messages 24 HOUR BYPASS or FIRE BYPASS automatically clear.
Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G,
... View more