About David

The 2 center pins of the RJ45 connector are used as tip and ring.   ... View more

The software for the DS7060 provides options of Perimeter Homeguard.  How is this used? Perimeter Homeguard: The zone type is active when the panel is armed. When the panel is armed perimeter only, the point is a delay zone, when armed full, this is an instant zone. ... View more

Access address 37 of keypad programming and enter the 3 digit account number followed by a 0 at the end of the number. Example: If the account number is 123, program 1230. ... View more

 Press [COMMAND] = [85] and enter a passcode. The most current event displays.  Scroll backward through events by pressing the (star *) key. ... View more

Note: The instructions printed on the back of the RF3341 is specific to the DS7400 series and does not pertain to D6412/D4412 panel types. The following commands used with the RF3341 keypad using the RF3224 receiver on the D6412/D4412 panel are as follows:  PIN + #1 will arm ALL ON  PIN + #2 will arm PART ON  PIN + #3 will arm PART 2 ON  PIN + # will disarm the system A, B, and C keys will operate per panel programming with a single press and hold till beep on the RF3341.  All other functions do not apply to the D6412/D4412 panel using the RF3224 receiver. ... View more