About CPrince

Issue Where does the MOV (red disc component) land on the D9142 (D9124 power supply)? Solution Between the AC hot (black) and ground (green).     Part numbers D9142, D9142F, D9142LC, ... View more

Issue What is the part number for the weatherproof pull station? Solution Part number for the weatherproof pull station: FMM-100SATK - This is the pull station FMM-100WPBB-R - This is the back box for it * Need both parts above to make the pull station weatherproof. The pull station (FMM-100SATK) will not be weather proof without the back box (FMM-100WPBB-R). Part numbers D467, FMM-100WPBB-R, FMR-100SATK ... View more

Issue Each terminal on the FCA-500 base has two wiring indicators.  Which one is to be used for installing the unit? Solution The labels printed in black on the interior of the circle made by the terminals are the correct terminals to be used for installing the unit. Part numbers FCA-500, FCA-500E ... View more

Issue The keypad on the DS7400 panel is beeping once every 10 seconds for no apparent reason. Solution For the DS7400XI VER.1 panel Master code + #80 Enter and exit program mode - Default  code to do this is 9876#0 Try cycling power to the panel. For all other DS7400XI panels VER. 2, 3, and 4 Master Code + system reset or Try entering programming mode then exiting programming mode  Default  code to do this is 9876#0 or 3. Try cycling power to the panel. Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, DS7447, DS7445 ... View more

Issue D7033 Keypad displays, "NOT PROGRAMMED, SEE INSTALL GUIDE" when connected to a D9068 DACT Dialer. Solution Make sure that the keypad is addressed to 1 Make sure that both ground wires are attached to the keypad under the "B" terminal Part number for the harness used with the D7033 or the DS9447 keypad:  45777C. Part Numbers D9068, DS9602, DCT-1, DCT-1E, FPT-DACT, DS9447, D7033, FMR-DACT-KEYPAD ... View more