Fire

This article response to the question if there is an automatic time sync between FSM and panel?

A modification of the sensor group icon is possible but requires a different file naming than for detectors

The goal is to have a fully illuminated field of view for the installed AVIOTEC/s. Testing is required for every installation to make sure, that the area is illuminated correctly with full coverage and no reflections, aberrations or other. 

Here it is the overview of the sensitivity settings for flame and smoke detection to adjust the camera to the application of the customer

Check this article and find out what's new in FSM version 5.6.1

This article contains the FSM - Anomalies symbols and their description

This article contains the standard settings/ minimum detection size for smoke or flame of AVIOTEC IP starlight 8000

In this article you will find out the type of lens mount of AVIOTEC & the difference between C-mount/ CS-mount lenses

This article explains if possible to install Fire monitoring system (FSM) in a virtual environment

This article gives answers to frequently asked questions regarding the AVIOTEC IP Starlight 8000 Video-based fire detection

In this article you will find the amount of Pixels, Resolution and Scale of AVIOTEC IP Starlight 8000 Video-based fire detection

This article explains the field of view (FoV) functionality of AVIOTEC IP Starlight 8000 Video-based fire detection

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,

Part numbers FPD-7024, FPE-7034, FPE-7039, D7039

Part numbers DS240, DS241, D296, D297

Part numbers D7033, FMR-7033, DS9447

Part numbers FPP-RNAC-8A-4C, D7038, DS9484,

Part numbers DS240, DS241, D296, DD297

Question   Do Bosch addressable smokes and smoke bases support CleanMe functions?   Answer   Currently the only Bosch smoke detector that supports CleanMe functions is the F220 series smoke heads when used with a conventional two-wire (F220-B6) base only and a CleanMe enabled control panel such as the D7024, and FPD-7024 conventional zones. Note:  The D7050, D7050TH does have a Chamber Check feature that will report dirty smoke if the head needs cleaning when used on the D7024, FPD-7024, DS9400m, DS9400, DS9400i.