The default Community Strings for Bosch cameras is - public. To change it, please follow the steps below.
1. Enable SNMP
2. Set the SNMP Community Name
The read and write Community names are configured in the camera separately using Bosch RCP+ commands. These are:
Refer to the RCP+ documentation for more details.
This is easily done using the following CGI commands. Substitute the IP address of the camera and the desired change the Payload from the default of "public" to a name required for your set up.
The CGI to change the community string for SNMP read access is:
The CGI to change the community string for SNMP write access is: