Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    38m ago
    The MegaRAID controller will automatically detect if a disk has errors causing the RAID volume to be degraded. An error message will appear on the desktop of that system. The system will also generate a beeping sound indicating it needs attention:   This article provides the steps to determine and replace your defective HDD in DIVAR IP R2 This article also applies when: On the front Panel the Red LED at the HDD is on The HDD is shown as faulty in the MegaRaid Software   Article requirements: Mega RAID Storage Manager
    View full article
    53m ago
    With the DSA E2800 Bosch introduced Multipathing. It is a fault-tolerance technique that defines more than one physical path between the camera and its iSCSI storage devices through redundant network connections. When using this feature, recording of video data and replaying video data is possible even in case of an iSCSI controller failure. To ensure also that outages of infrastructure equipment (e.g. Switch) could be covered, we recommend following Interconnection.  
    View full article
    59m ago
    This article describes the easiest method for adding Expansion shelves to a Base unit DSA E-Series E2600, E2700 or E2800.   This article also applies when: The amount of storage is overloaded and you need additional storage after fully populating the base shelf.   Article requirements: 1. Configuration Manager 2. Configuration Client which is included with BVMS 3. Santricity Software   Step-by-step guide      
    View full article
    an hour ago
    BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials. 
    View full article
    3 hours ago
    Question   What to do when MIC IP camera is unable to perform the Object Classification in IVA detection?   Answer   Based on examples of target objects and non-target objects, the Camera Trainer program uses machine learning to allow the user to   define objects of interest and generate detectors for them. Using Configuration Manager, you can configure the Camera Trainer program using both live video as well as recordings available through your MIC IP cameras. The camera also includes the latest release of Intelligent Video Analytics application for use on prepositions. Designed for mission-critical applications, the video analytics can reliably detect, track, and analyze moving objects while suppressing unwanted alarms from spurious sources in the image, even in harsh weather conditions. Advanced tasks like multiple line crossing, loitering, idle / removed object detection, crowd density estimation, occupancy and people counting are available for live alarming and forensic search. Object filters based on size, speed, direction, aspect ratio, and color can be defined. In order to   perform Object Classification correctly, please make sure that you have correctly: set the correct Orientation     Save all the pre-positions again if the orientation stetting is changed calibrated the camera A simplified calibration mode reduces installation time significantly because you only need to enter the installation height once for each camera, independent of pre-positions. After the camera is calibrated, the analytics engine can automatically classify objects as upright person, car, bike, or truck.) enabled 3D tracking set it up the tasks and followed the VCA manual.   Please see an  overview of object classification in the  following article: How to set up object classification with video analytics
    View full article
    Thursday
    Summary:   FW 11.50.2 must be used for Single Controllers and 11.60.2 for Dual Controllers   Overview:   In Q1 of the year 2020 the BU BT-VS announced that NetApp forces to update all systems E2800 to newer firmware than 11.40.x. At that time, it was strongly recommended to go to version 11.50.2 and in February 2020 recommendation was given for 11.50.R2  The version 11.50.R2 was forced by NetApp to get proper NetApp support services while valid warranty contract is active and to fix vulnerability aspects.   General Note:   Newer   NetApp controller   firmware   might be approved and   qualified by BOSCH.  (e.g. status 08/2020 there is an 11.60.2 qualified by BOSCH) - Details can always be found at the BOSCH   product catalogue  and  Release Note All customers owning a NetApp storage system with valid warranty agreement and registered unit do have access to the public announcement of NetApp. This was announced by NetApp on their support websites (see https://mysupport.netapp.com/).   Please follow our BOSCH Knowledge Base and monitor for updates at this article for important news.  The BOSCH sub model ID 356 ensures that the NetApp system is optimized for 24/7 video recording.
    View full article
    a week ago
    Possible causes and solution(s)   The parts included in the kit (DIP-7GRSN-P6) are the following: 1 x Graphics card for DIVAR IP all-in-one 7000 appliances 1 x Sound card for DIVAR IP all-in-one 7000 appliances 4 x Mini DisplayPort to DisplayPort adapter The kit must contain the proper brackets for the low profile (2u) and normal mounting (3u).   Causes   At first sight, you might think that the model is the correct one that shows in the Datasheet, but the Video card is smaller than the DIP Slot.   Solution   Please note that it may be possible that: the   Audio   card comes with the   normal  mounting (3u) bracket preinstalled and the kit contains the   low  profile bracket while the   Video   card comes with the   low  profile preinstalled and the kit contains the   normal  mounting bracket The video card model is the same for all types of sizes of DIP-7000 AIO.     Important Q&A:   1) Question   Is it still necessary to move the jumper to disable the on-board VGA? Answer: It is   NOT   necessary to move the jumper to disable the on-board VGA.   2) Question: Are BIOS changes also required? Answer:   No, as per BIOS specifications, the graphic priority should always be set to “off-board”. per default.   3) Question   How can you mount the brackets? Answer   Only two screws need to be tightened.
    View full article
    a week ago
    BVMS is a data-driven video management system that supports predictive solutions by establishing a decision center delivering actionable insights to customers. The latest version offers a map-based tracking assistant and improved geographical awareness with online maps. Read on to learn how to configure the map-based tracking assistant. The map-based tracking assistant requires a license. Before beginning, check the license in Configuration Client by accessing the License Inspector, which is found under the Tools menu. The value of the Online map and Map-based tracking assistant licenses must list "True" in the License Limit column.
    View full article
    2 weeks ago
    VCA (Video content analysis) is the process of automatically analyzing video images to alarm on predefined events like the detection of moving objects in the monitored area or tampering with the camera. It can also be used to gather statistics about the detected objects.     Depending on the camera type, the following VCA algorithm are available in Bosch cameras: –   Intelligent Video Analytics: Mission-critical, long-distance intrusion detection in extreme weather conditions. Detection and tracking of moving objects. –   Intelligent Video Analytics Flow: Basic motion detection of cells in a grid with velocity and direction. Used for counter flow detection in crowds. –   Essential Video Analytics: Reliable video analytics for small and medium businesses, large retail stores, commercial buildings, and warehouses. Detection and tracking of moving objects. –   MOTION+: Basic change detection of cells in a grid. Can be used to trigger recordings. –   Tamper detection: Detects camera occlusion, turning away from the monitored scene, extreme lighting conditions and basic idle / removed object detection.   If you would like to stop this setting, please follow the steps below.
    View full article
    2 weeks ago
    In order to increase system security in BVMS, it is recommended to set the Global CHAP password. This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.
    View full article
    2 weeks ago
    The purpose of this article is to provide a step by step guide about how to perform backup and recovery procedures of the VRM data base in the DIVAR IP 2000 EZ Recording Appliance.   Step-by-step guide Backing Up the Working Configuration: 1.To backup the working configuration of a DIVAR IP 2000 Recording Appliance, open the Appliance's "Dashboard": 2. From the Dashboard select the "Configuration" tab in the top right hand portion of your browse:
    View full article
    2 weeks ago
    Monitor Group gives operators flexible control over the content of a video wall or allows them to let the system take over this control automatically based on pre-defined scenarios. This article describes h ow to create a Monitor Group on a decoder VJD 7xxx/ 8xxx in BVMS Configuration Client. Note:  °Each decoder requires one or two channel expansion licenses (depending on the number of monitor ports available) The current MG implementation requires the availability of the Management server during operation Former Digital wall implementation has been removed in BVMS >=11.0 NEW BVMS v.11.0 feature The configuration step 9+10 from this article can be done also using the “Protect iSCSI storage with global CHAP password” (Menu item under Hardware). In case the function has been already enabled, step 9+10 is obsolete.
    View full article
    3 weeks ago
    Some devices that demand 60W or less are not powered by the NPD-9501A Midspan   Possible causes and solution(s) Some devices that demand 60W or less are not powered by the NPD-9501A Midspan The Midspan was released before the standards on mega poe were crystallized into accepted definitions at the IEEE standardization body. This device specifically targets to support power application to Bosch products that could not be served by lower capacity power source equipment. Using power devices that are not listed for this product in the datasheet migth result in power failure. Currently known   NPD-9501 Midspan  will not work with UHO-PoE-10 Housing   Solution   For products demanding 60W or less advise to use NPD-6001B Midspan.     NEW update To achieve a broader compatibility with switches and Midspans, for example the NPD-9501 Midspan and Cisco PoE+ switches (like C2960X, C3560CX and C9200). The UHO-POE-10 Outdoor housing received a product enhancement.   How to identify if UHO-PoE-10 is the new variant? The new batch contains products which contain SN starting with 404023113800040670 POE module is Blue, previous was Black!
    View full article
    3 weeks ago
    Not all Cisco PoE+ switches are able to power up the UHO-PoE-10 or VSP-UHO-PoE-10 outdoor housing (F.01U.300.502, F.01U.332.052). Bosch has introduced the UHO-PoE-10 in 2014 following the IEEE802.3-2009 standards Cisco claims that the Bosch UHO-PoE-10 at startup for a short moment (around 1 micro second) exceeds maximum current peek allowed by the updated IEEE 802.3-2015 standard, allowing the PSE (Power Source Equipment) to withdraw the power as a protective measure. Due to analogue overcurrent protector components in the Cisco switch it can happen that tolerances may cause variety in behavior over different Cisco switches, even when the same model and setups are used. Currently this behavior is only known on some Cisco models. (reports were seen on C2960X, C3560CX and recently C9200.)  
    View full article
    3 weeks ago
    If one of DIVARs IP 5000 AIO is selected on a user profile, the Operator Client opens the site and works fine. One message is displayed when two or more DIVARs are added into the same Enterprise system.   If you already have a DIP 5000 AIO into your Enterprise system and you want to add additional units but you receive the following message, you can solve this by using the steps below: "Server of configuration database is already in the server list. Remove either the server that is twice in the list or make sure that the configuration database is not cloned between servers."
    View full article
    3 weeks ago
    If you have the option "Extended (security)/configuration mode" active on a VIDEOJET decoder 7000 (VJD-7513) in Configuration Manager, then no video image will be shown and the BOSCH logo will be displayed at the cameo of the monitor output of the decoder. This is as designed in Configuration Manager, and this mode is to give you the opportunity to enable the SSD Encryption and to disable the USB ports. Once you are finished changing the extended security features, you must uncheck the check box and the decoder will go back to normal functioning.
    View full article
    4 weeks ago
    If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.   A workaround   here would be to default your Divar Network and follow the setup wizard > this will create the administrator user again and will let you create new users again. Or create the new users locally on your Divar.   Notice! Bosch strongly recommends upgrading to the latest firmware for the best possible  functionality, compatibility, performance and security. Check   http://downloadstore.boschsecurity.com/   regularly to see if there is a new  firmware version available.
    View full article
    a month ago
    Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can: send an e-mail notification and/or FTP push sound a buzzer and/or display a warning activate local alarm output
    View full article
    a month ago
    The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor:  In BVMS Configuration Client Capacity (GB) stands for the available physical capacity of the storage, as calculated and provided by the storage vendor (for example NetApp). In VRM Monitor – under Target Overview – Total is listed the number of all available blocks multiplied by the size of the blocks that is by default 1GB. This calculation concerns the logical storage and depends on the way the storage is used (for example how many Luns are imported in the system).     See also:  Video Storage Calculator web site
    View full article
    100% helpful (1/1)
    ‎08-26-2021 04:05 PM
    The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS. The applied rules and settings can be found in the readable command script file "C:\Program Files\Bosch\VMS\bin\FirewallConfig.cmd". The firewall rules that have been applied with the setup cannot be reverted and must be manually changed/removed if required.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist