About rlarkins

Issue How can I verify a Network port is not currently in use by other resources Solution From a Dos prompt, type Netstat -a and press Enter.    The screen will display all of the port numbers currently in use.  The ports in use are after the colon. For example, in the last line of the screen shot below, port 7750 is the port in use.  If the port number intended for connection is displayed prior to opening the intended software, connection on this port will not be available. ... View more

When viewing the Account Status of a Netcom Database Account, the following information is shown : NNC, Status, Status Changed Time, Anti-Sub, Virtual Account Number, Name, Supervision Time, Account IP, Account Port In the D6200 Software : Select Network, then select Network Utilities, then select Show Account Status from the D6200 menus. When the entire account database has been read from the receiver, the status message window will say, "Read Successful! Database converting...." for a couple of seconds. The Show Account Status window will appear showing all the accounts in the database from the receiver. ... View more

Issue How do I delete an account from the Netcom Account Database using the D6600/D6100 Receiver Faceplate/Menu? Solution From The D6600 or D6100 Faceplate/Menu Press the [M/E] key on the D6600, MENU key on the D6100 Enter a valid passcode and press the [M/E] or MENU key again. Using the Down arrow key scroll down to 7 Account Database Configuration. Press the [M/E] or MENU key to enter the menu. Using the Down arrow key scroll down to 7.2 Delete an Account. Press the [M/E] or MENU key. The display WILL show Input NNC Number. In the case of a NNC number, enter the NNC number of the account to be deleted using the keypad. Press the [M/E] or MENU key. The display changes and prompts Are you sure?         No/Yes 0/1         Press 1 to delete or 0 to cancel Press [CAN] twice to return to the Main Menu. ... View more

Issue How do I change the User's password on the D6600 Receiver? Solution The currently logged in user can change his/her password. Select Administration, then select Change password. A window will pop up prompting the user to enter his/her User ID and password. If the entered name and password are inconsistent with the currently logged in user, an error message will occur and the operation will be canceled. If the correct name and password have been entered, a Change Password will pop up. Enter the new password twice for verification. Note : The password will appear as a series of asterisks (*)           Click on the Change button to accept the new password. ... View more

Can I install a parallel printer on a D6600 receiver? Yes. The DB25 port on the back of the D6600 receiver panel is used to connect to a standard external parallel text printer. ... View more