About rlarkins

Question Which netork ports do the Access Easy Controller (AEC) and Access Easy Master Controller (AEMC) use to communicate on the network? Answer  Access Easy Controller      PORT PROTOCOL  PURPOSE  80  TCP  Web browser  443  TCP  Web browser  123  UDP  Time Syncronization  20, 21  TCP  AEC Utiity (Data collection)        Access Easy Master Controller      2346  TCP  Syncronize with AEC  2347  TCP  Syncronize with AEC  80  TCP  Web browser  443  TCP  Web browser  5432  TCP  AEC Utiity (Data collection)  137, 138, 139  UDP  AEC Utiity (Data collection)  123  UDP  Time Syncronization ... View more

Question How do you generate "clock in" and "clock out" messages on the Access Easy Controller? Answer This feature requires a PIN/Prox reader. To clock in, press "5" and present a valid card. To clock out, press "6" and present a valid card. ... View more

Issue The D6600 or D6100 LCD display does not show any information. Solution It is possible to change the display's contrast. After verifying that the receiver is powered on, press the up arrow several times. This will brighten the characters on the display. You can press the down arrow to dim the display again, if desired. If this does not resolve the issue, contact Bosch Technical Support for further information. ... View more

  Issue How is the time synchronized for Netcom accounts in the D6600 receiver? Solution D6600 Date/Time Synchronization You can use the D6200 Programming Software package to synchronize the receiver's time with the PC's time. From the menu bar, click System Management, then click Date/Time Synchronization. Click OK. Netcom Account Time Synchronization Also using the D6200 Programming Software package, you can set individual netcom account's time if a 7000/9000 series control panel is being used. Open the Netcom Account from the Account Database Configuration window. From the Edit Account window, select the Settings tab. Click on the drop-down menu for Time Sync and select 1. Time Synchronization is now enabled for this account, click OK. For these changes to take effect, you must click Send to Receiver and follow the prompts to ensure successful sending of the Netcom Account Database. *Note* This feature is not compatible with the newer B-series panels or the GV4 –V2.xx panels. Time Synchronization is enabled within the panel programming for these type of panels. ... View more

Question What port needs to be open in the firewall for the AMCIPConfig utility? Answer Port 10001. UDP protocol. ... View more