Fire

Part numbers D10024A, D10024, D9024, D8024, D323A

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M  

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+,DS7430, DS7433, DS7436

Part numbers D10024A, D10024, D9024, D8024, D323, D324, D323A, D324A

Part numbers Fire5, D10024A, D10024, D9024 , D8024

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Issue What is the Battery Charging Voltage on a D8112 Control Communicator? Solution The float voltage for the Battery Charging Circuit on a D8112 is 13.9 VDC at a maximum current of 1.4 Amps. The actual current available can be found by deducting any continuous load from 1.4 Amps. Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+,

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Issue The D7036 keypad displays "INVALID PIN" every time a button is pressed. Solution You must add the PIN used by the D7036 to the panel, and assign an authority level: Enter program mode by pressing [0] and then entering the programmer's PIN (the default programmer's PIN is 9876). Press [2] to choose Security. Press [1] to choose PINs. Press [2] to choose User PINS. Enter a user number that is not already in use, then press [#]. Enter [9436] for the PIN and then press [#]. Press [*] twice to return to the Security menu. Press [2] to choose Authority. Enter the same user number that you created in step 5. Press [2] to choose Medium. Press [*] three times to exit programming mode.

Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D275, EOL-200, D125, D125B, D129

Part numbers D10024A, D10024, D9024, D8024

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3 (8.05 or lower), D9412GV3 (8.05 or lower)

Part numbers D9061, D9052, D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

D7024

Issue What is the Access Output on a DS7400XI? Solution Access Output:  This is an output programmed to activate for 10 seconds when an access control PIN is entered at the keypad. Note: Not UL listed for access control (UL294)

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers D7033, D7024, DS9400i, DS9400M, DS9436, DS9447, D7036, DS9400, FMR-7033, FMR-7036