Fire

The operator 10000 is shown when detector fault/ Fire is acknowledged on the controller when no operator is logged in (e.g. Operator 2), by pressing the Acknowledge button.

Find out in this article how many Remote Keypads can be set as automatic connection to one Controller (Bosch Fire Alarm Systems)

This articles shows where can you restart the activation or delay period in FSP-5000-RPS if a new activation is triggered

This article explains why the fire status display of the controller does not show all fire detectors in fire condition.

If the Item "Panel" is e.g. 1-1.1.1 respectively 1-1.SI_PANEL.1,then this item is the Group item of the panel system status items e.g. 1-1.1.1-1 till 1-1.1.1-10. Most of these system status items have NORMAL as value after startup, others can have ON, e.g. items from Condition Monitoring.

Question I get to the FPA-1000 browser Start page. When I click on Login I get the following message: Invalid PIN - A PIN must be a 4 Digit number. Please check that Number Lock is On. What should I do?   Answer   Add the FPA-1000-UL IP address to the list of trusted sites, and your login will work correctly. A Crossover cable is required to connect directly to the panel. To enable JavaScript and cookies in Internet Explorer, add the FPA-1000-UL IP addresses to the list of Trusted Sites: Tools menu: Select Internet Options. Select the Security tab. In the settings for Trusted Sites, click Sites. Add the FPA-1000-UL IP address to the list of trusted sites.

Part numbers DS240, DS241, D296, DD297

Question   Do Bosch addressable smokes and smoke bases support CleanMe functions?   Answer   Currently the only Bosch smoke detector that supports CleanMe functions is the F220 series smoke heads when used with a conventional two-wire (F220-B6) base only and a CleanMe enabled control panel such as the D7024, and FPD-7024 conventional zones. Note:  The D7050, D7050TH does have a Chamber Check feature that will report dirty smoke if the head needs cleaning when used on the D7024, FPD-7024, DS9400m, DS9400, DS9400i.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,D7039, DS9431

Part numbers D7033, FMR-7033, DS9447

Part numbers FPP-RNAC-8A-4C, D7038, DS9484,

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

Part numbers FPD-7024, FPE-7034, FPE-7039, D7039

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,

Part numbers D1005, DS250, MX250, D7050, D7050TH, D285, D7050DH, D263THS, D273, D273ES, DS260, DS282, DS282-CR, DS284, DS284-CR, DS284ES, DS250TH, DS250DH, DS282TH, DS282THS, DS282THC, DS284TH, DS284THS, DS284THR, DS284THSR, DS284THCS, DS284THC, DS284IS, DS284THES, MX250, MX250TH, D286, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, MX250DH, MX280, MX280TH

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9447, DS9436, D7033, D7036, FMR-7033, FMR-7036

Part numbers FPA-1000, FPA-1000-UL, FPA-1000-V2