Fire

This article provides an answer if the FAA-350 Popit Base is a direct replacement for the Older D290 Popit Base.

Part numbers DS240, DS241, D296, D297

Part numbers DS240, DS241, D296, DD297

Question   Do Bosch addressable smokes and smoke bases support CleanMe functions?   Answer   Currently the only Bosch smoke detector that supports CleanMe functions is the F220 series smoke heads when used with a conventional two-wire (F220-B6) base only and a CleanMe enabled control panel such as the D7024, and FPD-7024 conventional zones. Note:  The D7050, D7050TH does have a Chamber Check feature that will report dirty smoke if the head needs cleaning when used on the D7024, FPD-7024, DS9400m, DS9400, DS9400i.

Part numbers FMM7045, FMM7045-D, D7024, FPD-7024, DS9400, DS9400I, DS9400M,

Part numbers F220-P, D285, D263, D273, D273ES, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, F220, F220-PTH, F220-PTHC

This is a generic solution for any photoelectric device application where the device seems to keep going in and out of trouble due to alignment issues. Part numbers DS240, DS241, D296, D297

Part numbers D1005, DS250, MX250, D7050, D7050TH, D285, D7050DH, D263THS, D273, D273ES, DS260, DS282, DS282-CR, DS284, DS284-CR, DS284ES, DS250TH, DS250DH, DS282TH, DS282THS, DS282THC, DS284TH, DS284THS, DS284THR, DS284THSR, DS284THCS, DS284THC, DS284IS, DS284THES, MX250, MX250TH, D286, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, MX250DH, MX280, MX280TH

This is how to troubleshoot where turning the key to the Test position does not put the smoke detector inside the duct enclosure into alarm, which will likely be due to the coil is missing.