Related ProductsBosch Recording Station
QuestionIs it possible to control an AutoDome connected to VideoJet X Series via Bilinx?
In BRS 8.8.1 Bilinx over Encoder only works for devices connected via VSDKPluginModule.
Current supported devices are VIP-X1600-XFM4B and VIP-X1XF.
VideoJet X series are connected per default via VCSModule, which does not support Bilinx communication.
To be able to control Bilinx devices on VideoJet X series please configure the following work around:
1. In BRS Configuration > IP Cameras and encoders > Scan network (VideoJetX is found) and add VideoJetX device to BRS
2. Click VideoJetX and click Edit
3. In tab General settings select Device Type BVIP H.264
4. In tab Dome settings mark Activate and select Connection Bilinx/IP Dome
Now the AutoDome can be controlled via Bilinx.
Note: Due to performance reasons do not change the encoder stream from MPEG-4 SH++ to H.264 streaming!
Only change the device type in BRS.