Before you can operate your VIDEOJET decoder 7000/ 8000 within your network, it must have a valid IP address for your network and a compatible subnet mask.
This articles explains how you can change the IP Address of VIDEOJET decoder 7000/ 8000 using Configuration Manager.
Notice!
Download the latest version of the Configuration Manager: go to http://www.boschsecurity.com and download it from the Software tab of the corresponding product page.
In Configuration Manager, the decoder currently is detected in the same way as other hardware, various information is displayed, and further configuration options are provided.
First, you need to Set the Session Authentication. Enter the username and the password of your device, if needed:
1. Go to the Network Access tab: In this area, you define the network settings for the decoder.
2. Fill in the necesarry details:
Notice! A new IP address, or a new subnet mask or gateway address, does not become valid until the decoder is restart
After entering all required addresses, it is necessary to restart the decoder:
3. Changes do not become effective until you click Save in the toolbar. In the toolbar, click SAVE.
4. Confirm the restart.
5. After restart, the software is available for use under the new addresses