Security: Video

Before you can operate your VIDEOJET decoder 7000/ 8000 within your network, it must have a valid  IP address  for your  network and a compatible subnet mask. This articles explains how you can change the IP Address of VIDEOJET decoder 7000/ 8000 using Configuration Manager.

Check the sample script from this article. It is not a working script, that can be used directly. Follow the instructions in comments of the script to tailor it for your use.  

This article contains the correct default IP address of Videojet decoder 8000 at the factory default

Monitor Group gives operators flexible control over the content of a video wall or allows them to let the system take over this control automatically based on pre-defined scenarios. This article describes h ow to create a Monitor Group on a decoder VJD 7xxx/ 8xxx in BVMS Configuration Client. Note:  °Each decoder requires one or two channel expansion licenses (depending on the number of monitor ports available) The current MG implementation requires the availability of the Management server during operation Former Digital wall implementation has been removed in BVMS >=11.0 NEW BVMS v.11.0 feature The configuration step 9+10 from this article can be done also using the “Protect iSCSI storage with global CHAP password” (Menu item under Hardware). In case the function has been already enabled, step 9+10 is obsolete.