Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can:
Motion detect: Here you can set events that can be used to trigger motion detection alarms.
Channel: Recording mode will be activated for the selected channels if the event occurs (make sure you have selected “Motion” for the corresponding cameras in Main Menu > Setting > Schedule to actually allow motion recording).
– click <Set> for the time bar to copy
– Under the ‘Copy’ line, select each of the days that have a similar setup (checkbox is ticked) and click <Save>. Use ‘All’ to select all days.
– the same time periods for the first day now apply to all selected days
4. When ready, click <OK> to return to the Alarm or Detect screen. Do not forget to click <Save> here to save your settings.
Please check for more information (like setting PTZ movement, setting a pop up a message, activate the buzzer when an alarm occurs etc.) on page 56 from Operation Manual: https://resources-boschsecurity-cdn.azureedge.net/public/documents/DIVAR_2000_3000_5000_Operation_Ma...