Fire

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, MX250, D7050, MX250TH, D7050TH

The FAA-325-B6S is to be used with the FAP-325, FAI-325 and FAH-325 model sensors only. The FAA-325-B6S provides an audible alarm in the immediate vicinity. Typical applications are for use in hotels, apartments, and hospitals. It is compatible with the FPA-1000, FPA-1000-UL, and FPA-1000-V2.

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4

Part Numbers D9412GV4, D7412GV4, D9412GV3, D7412GV3, D7212GV3, D9412GV2, D9124GV2, D7412GV2, D7212GV2, D9412G, D9124G, D7412G, D7212G, D9112, D9124, D7212

Only one keypad can be used at a time on the FPD-7024. Your keypad options are the builtin keypad on the FPD-7024, the FMR-7033, or the FMR-7036.

Part numbers D7212, D7412, D9112, D9412, D7412G, D9412G, D7412GV2, D9412GV2,

The D9124 is a 9000 control panel with a 24Vdc PSU and all the needed Fire Accessories for a basic system, all in one large red enclosure. See parts List below. The D9124 is made up of the following: D9112LTB, D9412LTB ,D9412GLTB, D9412GV2LTB - Control Panel D9101 - Red Enclosure D9100 - Carriers Module with the Following parts * * 2 - D192C - Bell Supervision Modules * 1 - D8125 - Popex Module * 1 - D928 - Dual Phone line Switcher * 1 - D9142LC - 24Vdc Power Supply D1256 - Fire Keypad D1601 - Hardwire Transformer

Part numbers D10024A, D10024, D9024, D8024

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D5200, D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH

 Program Menu for the DS9400, DS9400I and DS9400M

Part Numbers of old Morley Fire Panels -  D10024, D10024A, D9024, D8024. Part Number of the Loop Card (SLC Card) D9067.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039, D7053, D7035

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024, D9068, FMR-DACT-KEYPAD, D7033, D9051

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,RPS

Replace or upgrade - D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4,

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+,

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, RSP, RAMIV Overview - Keypad Options Tab in RPS or RAM IV Diagnostic Mode. The Keypad Options Tab allows you to view the keypad message and buzz the keypad for testing purposes. Keypad Options Tab Fields · Message (Accepted value: 16 character string): This cell displays the character string for the selected keypad. If you wish to change the keypad message: 1. Double-click on the cell that corresponds with the keypad whose message you wish to change. The Keypad # Message screen appears. 2. Enter the new message (up to 16 characters) in the field provided. 3. Click OK. Click Send to send the message to the keypad. Click Cancel to exit the screen without changing the keypad message.  

Issue Control trouble # 87 displays Battery Trouble. Probable Cause: The battery failed a battery test The battery is defective The wiring to the battery is disconnected Solution: If there has just been a power failure, wait a least 24 hours for the battery to recharge, then perform a system reset to re-test the battery and clear the error Replace the battery. Check wiring.