Fire

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, DS7447, DS7447E

Part numbers D8125, D8126, D8127, D9127, D9127U, D9127T

Issue Does the D7038 have built in Sync? Solution No, the Sync module is needed. The D7038 Input will pass the Sync Pulse to each Output.              Sync Module Part Numbers Brand Name                 Sync Module Part Number  System Sensor            MDL Wheelock                     DSM; SM Gentex                        AVS44; AVSM Note: If the DS9400 Series or D7024 Series panel is used with the D7038, NAC's 1 or 2 on the D7024 or DS9400 can provide a Wheelock Sync pulse. If the Eprom Revision is 2.04 or higher, either panel series can also provide a Gentex Sync Pulse from NAC 1 and or NAC 2. Part numbers DS9400, DS9400I, DS9400M , D7024, DS9484, D7038

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, 

Part numbers DS9400, DS9400I, DS9400M, D7024

The D9124 is a 9000 control panel with a 24Vdc PSU and all the needed Fire Accessories for a basic system, all in one large red enclosure. See parts List below. The D9124 is made up of the following: D9112LTB, D9412LTB ,D9412GLTB, D9412GV2LTB - Control Panel D9101 - Red Enclosure D9100 - Carriers Module with the Following parts * * 2 - D192C - Bell Supervision Modules * 1 - D8125 - Popex Module * 1 - D928 - Dual Phone line Switcher * 1 - D9142LC - 24Vdc Power Supply D1256 - Fire Keypad D1601 - Hardwire Transformer

Issue D8112 Displays CPU FAIL. Solution D8112 Displays CPU FAIL Remove Data wires from terminals 30 and 31. Copy the panel via RAMii, RPS or D5200 and save the copy. Send the panel a NEW RECORD or Blank Account. (Basically set the panel back to factory default.) Reload the regional copy back in the panel. Reattach the Data wires to terminals 30 and 31. If still in CPU FAIL - Rewrite the saved copy of the program and save as a different file name. Remove Data wires from terminals 30 and 31. Send the panel a NEW RECORD or Blank Account. Send the new file into the panel. Reattach the Data wires to terminals 30 and 31. If still in CPU FAIL -  replace the panel.

Part numbers D380

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, ARDIS

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, MX250, D7050, MX250TH, D7050TH

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

Part numbers D10024A, D10024, D9024, D8024

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+,

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+,