Camera display stamping becomes small after upgrade to FW 7.81.0060 for Bosch IP cameras CPP6 &CPP7

[#1]

Possible causes and solution(s)

• Causes

After upgrading the camera firmware to version 7.81.0060 and higher, the camera display name become smaller in the font size. This is observed in CPP 6 and CPP 7 Bosch IP cameras.

It is not possible to increase the font size of the camera display name for CPP 6 and CPP 7 Bosch IP cameras as this is capability is only implemented for CPP 7.3 Bosch IP cameras.

DinionIPultra8000MP_CPP6_12MP&4K (FW 7.82.0025):  

DinionIPultra8000MP_CPP6_1080p (FW 7.82.0025):

• Solution

This behavior where the OSD font size is too small (half height) when resolution is set to 1080p or higher is now fixed in FW version 7.85.0016.

If you still encounter this OSD resolution issue, please upgrade your camera to the FW 7.85 or the latest one available on the Download Area webpage.