DIVAR IP all-in-one 5000 (DIP-5244IG-4HD) without the video card:
When accessing the Operator Client from the Kiosk mode, the camera streams displayed on the cameos show a view that does not match the view from Operator Client running from desktop (Under the BVRAdmin account) or Remote Desktop. The scaling seems to be off.
Note:
The DIVAR IP all-in-one 5000 (DIP-5244IG-4HD) is the model without the added video card. The production units of the DIP 5k AiO can run Operator Client locally on the DIP5k AIO without the higher end graphics card and display at least 4 1080p cameras @ 15fps as long as the I-frame distance was well over 30.
✓ You can run the Configuration Client from the Kiosk.
✓ If you logon to the desktop with the BVRAdmin account, you can run the Operator Client from the console (desktop) on the unit. On this unit this is only supported for diagnostics/ testing purposes. This falls under the same category as the Remote Access to the unit.
✓ The Central GUI should be used for "configuration and operation management." It does not mention watching videos from the same GUI.
✓ You can attach a single monitor to the AiO, in order to run the Configuration Client from the Kiosk (Management purposes).
⚠️ When using a remote workstation/ computer, to run the BVMS Operator Client remotely, the workstation / computer should meet the hardware and OS (Operating System) requirements for such use.
◦ The hardware and OS (Operating System) requirements can be found in the datasheet of each version of BVMS Operator Client you use. Select the product family from the official Bosch Security and Safety Systems page, go to Downloads area and download the data sheet.
◦ Bosch strongly urges customers to use the driver versions mentioned in the following BVMS Release notes. This ensures that the software can perform its task reliably and the specified performance.
◦ Please also refer to the following Datasheet for the Models with and without Graphic Cards.