How does the ‘Active profile’ work for Flexidome Multi 7000i camera?
"Active profile" shows the non-recording profile when recording is off. When the "Encoder Streams" menu is accessed while the device is recording, the following message appears at the top of the page: “Recording is currently active".
When recording is on, the "Active profile" shows the recording profile. So in case of recording off, you can change Active profile in the drop-down menu from “Non-recording profile”. When recording is on, the active profile is managed by *“Recording profiles”.
This is working as designed and therefore, selecting alternate active profiles for stream 1 for all cameras will not be possible and you will have to select profile 2: Balanced.
Note: Stream settings can be chosen for each of the 4 cameras separately and each stream has their own active profile.
*“Recording profiles" menu:
You can make changes to the recording options on a per-camera basis for both recorders; 8 settings in total.
When you make changes (for example, from continuous recording to pre-alarm recording), there is no way to see that this was changed in the table.
Therefore, to check if everything is set-up correctly, you need to check each camera-recorder combination in the list one-by-one and for each profile.
Good to know:
Below you will find the profile number description, as described in the Operation Manual:
Profile number Description
Stream 1 always runs at maximum selected resolution in stream limits. On stream 2 and 3, you can select various downscaled resolutions.
Training:
For a better understanding of using FLEXIDOME multi 7000i cameras, we encourage you to join our online trainings from Bosch Building Technologies Academy!