Security: Video

Starting from Firmware v8.80.0090, the file for all CPP14 sub-platforms are now unified into a single file.

This article explains what is the URL for the RTSP Stream on the FLEXIDOME Multi 7000i.

Please find in this article some settings you can do separately for each FLEXIDOME multi 7000i camera imager on the camera’s web page.

Some options have been removed when compared to previous CPPs, as they are only useful for moving cameras. Find here the overview of the web page of ‘Live’ functions section and the options remained available for FLEXIDOME multi 7000i (CPP14) cameras.

‘Display stamping’ submenu has been moved from the General menu to the Camera menu.

The System Overview and Dashboard page shows all available data of your camera.  Find more useful information about FLEXIDOME multi 7000i camera from this article!

There might be problems when you are trying to use the Forensic search function for FLEXIDOME Multi 7000i cameras (FW 8.71.0066) after upgrading from BVMS 10.1 to BVMS 11.1.1.65. The message is saying that “Forensic search must be configured for this workstation”

When looking at the MQTT explorer, the naming of the counters is always as in the first camera, so always "Counter-1-1" and "Counter-1-2".

Check this article to learn about what to do when a FLEXIDOME multi 7000i (IR) or FLEXIDOME panoramic 5100i (IR) does not boot up or is unresponsive.

Find out from here what to do if your FLEXIDOME Multi 7000i or FLEXIDOME Multi IR is coming offline sporadically/ disappears from the network

This article explains what you can do when the ‘Stream limits’ parameter set in the webpage of FLEXIDOME multi 7000i camera is not visible in BVMS Configuration Client.

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

There is no need to disable UDP encryption on FLEXIDOME multi 7000i camera.