- Top Results
DIVAR IP all-in-one 7000 has a dedicated BMC port on the rear side.
Each DIVAR IP all-in-one 7000 unit is delivered with the default BMC username admin and with an initial BMC password. The initial BMC password is unique for each unit. You can find it on the label at the rear of the unit, below the BMC port. After the first logon to the BMC web interface, you will be requested to change this initial password. Make sure to store the new password in a secure location.
BMC information cannot be retrieved within the software and is physically provided on the device itself.
⚠️Notice! For security reasons, do not connect the device to a public network through the BMC port.
To configure the BMC settings, please refer to the User Manual (page 21).
While it is possible to export some logging from the BMC interface, it is recommended by ASUS to use the ASUS Inband Tool for this purpose instead.
If the Operating System is not responsive for any reason, it is a backup solution. In this event however, ASUS points to the startup codes seen on the LED display at the back of the unit, as well as on the boot-up screen’s right hand side corner, for all needed troubleshooting information.
Step-by-step guide
Using a web browser, enter the IP address of the BMC interface, along with the username and the password.
RAID Event Log
The events recorded for the RAID array can be viewed through BMC but cannot be exported. To access and view the logs, go to Home > Settings > RAID Management > Event Log.
The events can be filtered by event type, but they can only be viewed and not exported.
If access to the OS is impossible, creating a screenshot of the RAID events here would be the best solution.
IPMI Event Log
The Logs & Reports > IPMI Event Log page displays the list of events incurred by the different sensors on the device. Click on a record to see the details of that entry. Hover over the graph to view the number of events by date. You can use date range, sensory type, or sensor name filter options to view specific events.
- Click the “Clear Event Logs” option to delete all existing records for all sensors.
- Click the “Download Event Logs” option to download the logs in a raw or text format.
System Log
This page displays logs of system events for the device (if the options have been configured).
NOTE: Logs must be configured under “Settings > Log Settings >Advanced Log Settings” to display any entries. Filtering options are also available for this and all logs in this section.
It is not possible to download any logs from this page.
Audit Log
This page displays audit events for this device (if configured).
NOTE: For configuration, go to “Settings > Log Settings >Advanced Log Settings”.
It is not possible to download any logs from this page.
Video Log
This page displays available recorded video files (if the options have been configured).
NOTE: For this configuration, go to “Settings > Video Recording > Auto Video Settings > Video Trigger Settings”.
It is not possible to download any logs from this page.
