Important Cookie Information

This website uses absolutely necessary cookies. If you consent to the use of convenience cookies, please click “Yes, I agree.” By clicking on “Privacy Settings.” you can change this setting at any time and withdraw your given consent. Icon down see more You can find detailled information in our Privacy Policy Icon forward-right
Icon up see less

Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    How to make Event Search in Web Interface of a DIVAR for Alarms generated by Input Alarm.

    This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface. There are only 3 different search parameters for Event type search, which are "All", "Motion" and "Alarm". Once can search for any alarms during the set time period and channel and in this way indirectly to filter for Input Alarm (if only Input Alarm triggers Recording for a particular channel). It is not possible to directly narrow the search for particular Alarm type (ex. Input alarm).

    1.Configure the Input Alarm.

    • Go to: Settings - Alarm - Input Alarm.
    • Click Enable and Chose the respective Input (from 1 to 16), then click Record Channel and Save. 


    Note: The other Settings like Buzzer, Display Mon. A can also be configured but is not a must for performing Even Search.

    • Schedule the recording.
      • Settings - Schedule: Chose the days of the week, the time and enable "Alarm"


    • Set the recoding stream.
      • Settings - Storage - Recording: Chose the stream to be recorded.


    2. Event Search - Chose the respective Camera (that recorded on Alarm Input) and search for "Alarm"


    Version history
    Revision #:
    12 of 12
    Last update:
    ‎07-22-2019 01:46 PM
    Updated by: