About David

 The A, B, C keys must be pressed two times to activate. Verify correct programming under A, B, C Key programming.  -  Ensure correct setting of Alarm Output: No Output, Steady, or Pulse as needed.       -  Enter the Key Text, which should display upon activation      - Select Ack Tone Yes/No for the acknowledgement tone upon activation      - In the Report Code parameter, enter the code for the panel to report upon key activation.             * In Modem Format the panel reports; Alarm Report Point [xx]            * In Pulse format, the first digit you enter here sets the report group. The second digit sets the point number. ... View more

1.  The D6200 software does not provide functionality for migrating data into Excel however this can be done using Windows’ built-in copy/paste functions. 2.  Open The D6200 software and access the network account database. Connecting to the receiver is recommended to ensure the complete current database is accessed. Otherwise accessing the database is another option.This can be done either by accessing the database file or by connecting to the receiver. Access the network account database from the receiver by selecting Network > Network Account Database Management and “Read/Manage Network Account Database Configuration from Receiver”. Access the network account database from the database file by selecting Network > Network Account Database Management and “Open/Manage Network Account Database Configuration from File”. When accessing from a file, select the filename and click Open. When opening from a File, select the file that starts with ACT; i.e. ACT_FROM_D6x00(172.30.10.110).03-19-2018.13_06_05.    5. The account list will appear as below with the list of accounts used in the receiver. 6. Once you are looking at the account list, Highlight the 1st Row and press CTRL - A to highlight the entire table. 7. The press CTRL - C to copy the entries. 8. Open a new workbook in Excel, and Press CTRL-V. 9. The D6200 account database is now in the desired format. Adjust column widths as desired, and please notice that the designated NNC number will not look exactly as it did in the D6200 software. Note:  This is a one-way process for extracting the data from the Account Database. The reverse process will not work to update the data from Excel to the Account Database. ... View more

When attempting to send program changes to the control panel prior to saving, the below message may appear if connecting via: Modem, Enhanced Direct connect or Network: Because the D5360 is a legacy connection device and uses the conrol panel's ‘program port’, this warning is not available. Once connection is established, the Panel Sync window will appears and provide options to ‘Send’ or ‘Receive’ panel data regardless of whether program changes have been saved or not.  The DX4010V2 serial interface is recommended for local programming with Remote Programming Software.  The DX4010V2 Enhanced Direct serial interface allows the ability to view programming while connected, use diagnostics and download history.   ... View more

 IP Communicator Component Overview.  Bus Type, Address Selection and Function. Maintenance and troubleshooting LEDs. How to connect to RPS using the IP Communicator. How to connect to RPS using: ‘Connect Via: IP Direct. How to connect to RPS using ‘Connect Via:  Network’. B8512G/B9512G or GV4. FPD-7024, all G series 6.0 and higher, GV2 and GV3 type. How to configure the IP Communicator using keypad programming. When using B920 or B930 SDI2 type Keypads. When using D1255 or D1260 SDI type keypads. How to configure the IP Communicator using Remote Programming Software. How to configure the IP Communicator using the Web Browser. Basic Network Settings Page. Advanced Network Settings Page. Panel Address Settings Page. Select the Device Address Remotely. Encryption and Security Settings Page. Encryption Enable. Web and Automation Security. Maintenance Page. Factory Default Page. Firmware Upgrade Page. Connect to the Web Interface when the IP address is Unknown. Replace an IP Communicator connected to SDI2 keeping the original settings. Determine if the B426 is the original or the modified version. Troubleshooting. Trouble connecting the IP Communicator to the Web Interface. Applications with the IP communicator set to DHCP/Auto-Enable=YES. Applications with the IP communicator set to DHCP/Auto-Enable=NO. There is a problem with the security certificate when logging into the Web Interface. The IP Communicator LED’s are not working. Can supervision be disabled for the IP Communicator? The IP Communicator settings in RPS are greyed out or keypad programming is locked. Trouble connecting to RPS using the IP Communicator. Verify correct panel account type selected in RPS for existing panel firmware revision. Verify correct module address selection. Check for address conflicts. Verify the correct RPS passcode is used when connecting. Trouble connecting to RPS: ‘Connect via: IP Direct’. Trouble connecting when using Connect via: Network. Verify correct Encryption settings (G or Non-G thru GV4 v1.00-1.99 types only). ... View more

The B930 can use menu items to activate emergency key functions in the same way as using the A or B or C keys on B920/B921C keypads. The steps below describe adding A B C key function from the shortcut menu. Add the A B C keys to the shortcut menu. 1. Select a response for each key under Keypads>Global Keypad Settings. 2. Add the A B C keys to a Shortcut Menu.      a. Select a Shortcut Menu number and double-click the Function parameter.      b. From the drop-down list, select the A or B or C key as the function.      c. Select Yes for the address of the keypad which will display the menu item.      d. The lowest numbered menu numbers are the first ones to display when the menus are accessed. B930, B3512, B4512, B5512, B930, D7212GV4 Ver2+, D7412GV4 Ver2+, D9412GV4 Ver2+   ... View more