Fire

How to configure the FPD-7024 for various network reporting options. How does the FPD-7024 Network Communication alternate between devices?

Programming the FPD-7024 to report via ethernet to the CS with a DX4020 Network Card.

Configuring the FPP-RNAC-8A-4C on an Option Bus Fire panels FPD-7024 & FPA-1000.

AC Fail or Low Power Trouble on FPP-RNAC-8A-4C

How to access the Menu features on the B926F which does not have a Menu button.

The FLM-7024-ISO MUX bus isolator module is placed between devices on the MUX bus. A short on the bus causes activation of the isolators adjacent to either side of the short. This effectively separates all devices between the activated isolators from the rest of the bus. This prevents failure of the entire bus. When the short condition is removed, the isolators automatically restore the entire loop to normal operation.

Part numbers FPA-1000, FPA-1000-V2, FPE-1000-NE, FPE-1000-NW, FPR-1000-NF  

This article discusses how to send reports to the CS (Central Monitoring Station) from the FPA-1000-V2. We can network up to 8 of the FPA-1000-V2 panels together.  Each panel can report to the CS by itself, or one panel can report for all.  In either configuration, each panel needs its own unique account number.  

How to Connect to a FPD-7024 locally using Enhanced Direct with a DX4010V2

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2

Overview When devices are connected to the Option Bus on the FPD-7024, the bus must be scanned allowing the panel to see the device. After removing devices, such as the DX4020, DX4010V2 or DX4010i, the option bus must be scanned again to complete the removal, or the panel continues to supervise the device resulting in a keypad display: Trouble DX4020 and history event: SYSTRB017. Issue After completing programming the panel reports trouble DX4020; history shows SYSTRB017 Solution After removing the DX4020, DX4010V2 or DX4010i, the option bus must be scanned again to complete the removal or the panel continues to supervise the device.  From the Panel Keypad (not a remote keypad) perform the following steps to update the option bus: Select 0 for PROGRAMMING and enter the installer code Select 3 for PROGRAM SYSTEM Select 4 for OPTION BUS Select 1 for UPDATE BUS

Question What does it mean when the panel displays a trouble of "Dialer Answering Unknown"?   Answer   "Dialer Answering Unknown" is caused by the panel answering an incoming phone call. This will cause a trouble tone from the panel that will clear itself when the panel releases the line, this may take up to 10 minutes. If another event (Alarm, Trouble, Supervisory) occurs during this time, the panel will drop the line and dial out to the central station. To prevent or stop this set the Line 1 Ring Count to (0).  

Part numbers D8125MUX, D7050, D7050TH, D5060, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G,

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, D9127, D9127T, D9127U, D8127, D8126

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400, RPS, DX4010-V2,

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, DS7465, DS7465i, D8125MUX, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, B600, D5060, D7053, FPD-7024, D7024, DS9400, DS9400I, DS9400M