Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 


    Sort by:
    ‎05-16-2018 04:29 PM
    Part numbers FPD-7024,  D7024, DS9400, DS9400I, DS9400M, D7053, D7035, DS9465I, MX465, DS9432,
    View full article
    ‎05-16-2018 04:00 PM
    The programmer for the DACT family (D9068,FPT-DACT; DCT-1; DCT-1E; DS9602) is one of the following: D7033 DS9447 FMR-DACT-KEYPAD Notes The FMR-DACT-KEYPAD is not the same as the FMR-7033. The FMR-7033 will not program the D9068 DACT family (FPT-DACT; DCT-1; DCT-1E; DS9602).
    View full article
    ‎05-16-2018 03:35 PM
    Part numbers D125B, D7212, D7412, D9112, D9124, D9412, D7212G, D7412G, D9112G, D9124G, D9412G, D7212GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, 7412GV4, D9412GV4, B8512G, B9512G
    View full article
    ‎05-16-2018 03:33 PM
     Program Menu for the DS9400, DS9400I and DS9400M
    View full article
    ‎05-16-2018 03:26 PM
    Part Numbers - D7024, FPD-7024, DS9400, DS9400I, DS9400M
    View full article
    ‎05-16-2018 03:25 PM
    Bosch part numbers D340, DS290, D263, D263TH, D263THC, D263THS, DS282, DS282TH, DS282THC, DS282THS, F220-B6, F220-P, D287, D288, D285, D285DH
    View full article
    ‎05-16-2018 03:24 PM
    Part Numbers D7024, FPD-7024, DS9400, DS9400I, DS9400M
    View full article
    ‎05-16-2018 03:23 PM
    Part Numbers D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, D192C, D192G
    View full article
    ‎05-16-2018 03:12 PM
    Part numbers FPD-7024, B426, B420, DX4020, B450, B440, B441, B442, B443, B444
    View full article
    ‎05-15-2018 05:22 PM
    Part number list, DS9400, DS9400I, DS9400m, D7024, FPD-7024, D7053, D7035, D7039, FPE-7039,DS9431, DS9431R, MX465, DS9465, DS9465I, DS9432.
    View full article
    ‎05-15-2018 04:21 PM
    Perform these steps to enable the D7024, FPD-7024, DS9400, DS9400I, and DS9400M for RPS programming via phone line with a compatible RPS modem: Press (0) Enter Program Mode. Enter Pin (Default is 9876). Press (6) Accounts. Press (4) Ring Count. Set Ring Count to (02) #. Press the (*) key two times or until you see PROGRAM MODES. Press (3) System. Press (7) Remote Program. Press (1) Enable. Press the (*) key five times to Exit Program Mode. You need to dial Line 1 on the panel. It is the second line down on the panel (it is NOT the line in the top right). Before connecting with RPS, perform an Auto-Learn with at least one Mux Device connected to the Mux loop, then send your RPS program to the panel. Press (0) Enter Program Mode. Enter Pin (default is 9876). Press (9) Program Mux. Press (4) Auto Program. Press (1) Yes.
    View full article
    ‎05-14-2018 05:39 PM
    AC Fail operation in the following panels. D7212GV2, D7412GV2, D9412GV2, 7212GV3, D7412GV3, D9412GV3, 7212GV4, D7412GV4, D9412GV4, B8512G and B9512G.
    View full article
    ‎05-10-2018 06:50 PM
    Only one keypad can be used at a time on the FPD-7024. Your keypad options are the builtin keypad on the FPD-7024, the FMR-7033, or the FMR-7036.
    View full article
    ‎05-10-2018 06:51 PM
    DS9400, DS9400M, D7024, and FPD-7024 Fire Alarm Panels the Water-Flow timer operation.
    View full article
    ‎05-14-2018 05:17 PM
    Programming the FPD-7024 to report via ethernet to the CS with a DX4020 Network Card.
    View full article
    ‎05-11-2018 10:10 PM
    Configuring the FPP-RNAC-8A-4C on an Option Bus Fire panels FPD-7024 & FPA-1000.
    View full article
    ‎05-09-2018 03:21 PM
    AC Fail or Low Power Trouble on FPP-RNAC-8A-4C
    View full article
    ‎05-11-2018 03:30 PM
    From RPS in the following panels DS9400, DS9400I, DS9400M, D7024, and FPD-7024 you have the option to set Anti-takeover Setting to one of the following. a.)Allow all local programming: All programming items may be accessed from the local keypad. b.) Lock phone/account numbers only: All programming except phone numbers and account numbers may be accessed from the local keypad. c.) Lock all local programming (except Date/Time and all user PINs): Allows only the Date and Time to be set from a local keypad.
    View full article
    ‎05-11-2018 04:48 PM
    Option Bus NAC Outputs (FPP-RNAC-8A-4C) will never be in sync with the NAC Output of the panel (FPA-1000, FPA-1000-UL, FPA-1000-V2, or FPD-7024).
    View full article
    Top Contributors