Fire

Question   Do Bosch addressable smokes and smoke bases support CleanMe functions?   Answer   Currently the only Bosch smoke detector that supports CleanMe functions is the F220 series smoke heads when used with a conventional two-wire (F220-B6) base only and a CleanMe enabled control panel such as the D7024, and FPD-7024 conventional zones. Note:  The D7050, D7050TH does have a Chamber Check feature that will report dirty smoke if the head needs cleaning when used on the D7024, FPD-7024, DS9400m, DS9400, DS9400i.

The goal is to have a fully illuminated field of view for the installed AVIOTEC/s. Testing is required for every installation to make sure, that the area is illuminated correctly with full coverage and no reflections, aberrations or other. 

The cause of the error is combination of group address and the text length of the group label as defined in RPS as shown in this article

Part numbers D7024, FPD-7024, D7042, D7052, D7053

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

This article explains the field of view (FoV) functionality of AVIOTEC IP Starlight 8000 Video-based fire detection

This article response to the question if there is an automatic time sync between FSM and panel?

This article answer to the question: " What is the maximum of simultaneous client connections supported on FSM?"

Have a look at this article and see how you can setup the FMS - OSD Logo

This article explains if possible to install Fire monitoring system (FSM) in a virtual environment

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,D7039, FPE-7039, DS9431

This article is a step by step guide about how to create panel container on map by using Macro-Area (point) on FMS.

This article answer to the question: Is the usage of command and digital properties function supported -FSM?

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9447, DS9436, D7033, D7036, FMR-7033, FMR-7036

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

Follow the steps from this article to see the labels from the sensors in FSM which are configured in RPS

Is it possible to use complex maps on the FSM client? Recommendation is not to use very complex maps, very complex maps (means big size DWG files) can be made “lighter” by reducing the number of vertex (e.g. remove texts in DWG file and make rather use of the FSM text feature)

This article contains the FSM - Anomalies symbols and their description

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,D7039, DS9431

Part numbers FPP-RNAC-8A-4C, D7038, DS9484,