Fire

Part numbers DS9484, D7038, FPP-RNAC-8A-4C

Follow this step-by-step guide and learn how you can use keypad programming to configure FPD-7024 IP communications

Part numbers FMM7045, FMM7045-D, D7024, FPD-7024, DS9400, DS9400I, DS9400M,

Check this article and find out what's new in FSM version 5.6.1

This article answer if the labels or texts automatically updated in FSM after change in RPS.  

Follow this step-by-step guide from this article and find out how to stop and restart the FSM Server service

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, D8125MUX, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, B600, B299, D8125, FPA-1000, FPA-1000-V2, FPE-7039, D7039, DS9431, FDP-7024, D7024, DS9400, DS9400I, DS8400M, D10024A, D10024, D9024, D8024, D7212B, D9112B, D7212B1, D9112B1, D7212, DS7430, DS7436,

Part numbers FPA-1000, FPA-1000UL, FPA-1000-V2

The following steps describe an efficient way to update the panel firmware in an AVENAR panel 4.x network via SD card, thus keeping downtime of the panels to a minimum. To further reduce downtime, it is recommended to network the panel nodes via ETH.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400

Any related HW change in the FSM server will lead to license not being valid and will need to be transferred.

This article answers the question:  What is the difference between "Actual status" and "Alarm status"?

This article provides a solution regarding the ringtone alarm which can be stopped in FSM. 

Library is offering 3 different sizes of detectors and can be customized. See this article and find out how you can customize Symbols (icons) - FSM

Is the status displayed when Supervisory Usage type is selected in RPS - Bosch Fire Monitoring System?

To check Directx and graphics card capability you can use the dxdiag tool provided with Windows OS.

Part numbers F220-P, D285, D263, D273, D273ES, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, F220, F220-PTH, F220-PTHC

To silence all NAC's of one panel (FPA-5000/Avenar) from the map in FSM Step-by-step guide   Insert a sensor on the map of FSM Under sensor properties choose: General: Add symbol: FIRE_Panel_FPA_BG Settings: Driver Instance: the panel / compound where the FSM is belongs to Address-> e.g. Panel 1-10.1 ! Please pay attention: there are other “Panel” possibilities to choose. Please do not choose Panel 1-10 (Communication)! After inserting the settings click “ok” Then Apply At the map when you right click the panel symbol you will get the commands as shown below.   If there is a fire alarm, you can right click at the panel and then click at “silence on”. Please be sure, that then every NAC which is belonging to this panel is “silenced”. Additional: there is also a command "silence scope" which then has the effect, that the whole scope will be silenced.

Part numbers FPD-7024, FPE-7034, FPE-7039, D7039