Fire

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9447, D7033, FMR-7033

This article explains how you can reset the FPA-1000, FPA-1000-UL, and FPA-1000-V2 panels.

Question I get to the FPA-1000 browser Start page. When I click on Login I get the following message: Invalid PIN - A PIN must be a 4 Digit number. Please check that Number Lock is On. What should I do?   Answer   Add the FPA-1000-UL IP address to the list of trusted sites, and your login will work correctly. A Crossover cable is required to connect directly to the panel. To enable JavaScript and cookies in Internet Explorer, add the FPA-1000-UL IP addresses to the list of Trusted Sites: Tools menu: Select Internet Options. Select the Security tab. In the settings for Trusted Sites, click Sites. Add the FPA-1000-UL IP address to the list of trusted sites.

This articles shows where can you restart the activation or delay period in FSP-5000-RPS if a new activation is triggered

When using Wheelock / Cooper / Eaton Exceeder LED 3 Strobes and Horn Strobes on a UL Listed Bosch Fire panel a DSM or SM Wheelock Sync Module is required.

Part numbers FPA-1000, FPA-1000-UL, FPA-1000-V2

This guide gives a example of how to check that OPC is receiving commands and transmitting to controller.

Part numbers DS240, DS241, D296, D297

This article contains the RCP+ CGI command for AVIOTEC starlight 8000 that helps you to adjust the VCA darkness or brightness level

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

This article contains the RCP+ CGI commands for AVIOTEC starlight 8000 that helps you to enable or disable the scene quality (bright or dark)

In cases where RPS configuration cannot be loaded please follow the instructions from this article.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

  Part nummbers - FPE-1000-NE, FPE-1000-NF, FPE-1000-NW, FPA-1000-V2, FPA-1000  

Is always recommended to backup the database before running the default process. Find out in this article the steps to restore default FSM (Fire Monitoring System) configuration

Use the tool provided when FSM server application is installed, to manage export/import of configurations. Please note: This tool is only for configuration backup and does not include logs and history.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,

How to correct the FPD-7024 or D7024 error: Programmed Points Exceeds Max. How to correct the FPD-7024 or D7024 error: PRGRMMD POINTS EXCEED MAX.