Fire

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,

A modification of the sensor group icon is possible but requires a different file naming than for detectors

Learn from this article how to enable usage type Fire on KD55 element from Bosch Remote Programming Software (RPS)

Follow this article and learn about the option which allows you to configure the color for each state & sensor in FSM

This article answer to the question: "Can a fire alarm have the same sound as the one for a fault?"

If the Item "Panel" is e.g. 1-1.1.1 respectively 1-1.SI_PANEL.1,then this item is the Group item of the panel system status items e.g. 1-1.1.1-1 till 1-1.1.1-10. Most of these system status items have NORMAL as value after startup, others can have ON, e.g. items from Condition Monitoring.

Find out in this article how many Remote Keypads can be set as automatic connection to one Controller (Bosch Fire Alarm Systems)

Live time event printing is supported. To enable it, add a xml file in program data folder with the name of the printer.

In this article you will find out the type of lens mount of AVIOTEC & the difference between C-mount/ CS-mount lenses

In this article you will find the amount of Pixels, Resolution and Scale of AVIOTEC IP Starlight 8000 Video-based fire detection

This article contains the standard settings/ minimum detection size for smoke or flame of AVIOTEC IP starlight 8000

The operator 10000 is shown when detector fault/ Fire is acknowledged on the controller when no operator is logged in (e.g. Operator 2), by pressing the Acknowledge button.

This article contains a step-by-step guide about how you can set the field of view (FoV) of AVIOTEC IP starlight 8000

Thanks to the latest AI technology and deep learning methods, the newest generation of fire detection cameras AVIOTEC 8000i IR becomes the best, fastest and more robust option for applications where traditional detectors might find limitations.

This article explain what should be done if new detectors are added to the system. 

In the event of flames and smoke, the camera's built-in intelligent algorithms analyze the scene in real time by concatenating and transforming the input data. Deep learning AI directly analyses the data and if a fire is confirmed, it triggers an alarm and sends a signal either to the fire panel or the Video Management System.

This article presents step by step how to configure the “E-Mail Sender” function in FSM.

Here it is the overview of the sensitivity settings for flame and smoke detection to adjust the camera to the application of the customer

This article explains why the fire status display of the controller does not show all fire detectors in fire condition.