Fire

This article explain how it is possible to automatically zoom in the map in case of alarm.

Library is offering 3 different sizes of detectors and can be customized. See this article and find out how you can customize Symbols (icons) - FSM

This article answers the question:  What is the difference between "Actual status" and "Alarm status"?

Here it is the overview of the sensitivity settings for flame and smoke detection to adjust the camera to the application of the customer

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

This article explains step by step how to enable commands for operator (other than admin) in FSM

Have a look at this article and see how you can setup the FMS - OSD Logo

This article presents causes and solution about different detector symbols displayed at different clients in FSM. 

Is the status displayed when Supervisory Usage type is selected in RPS - Bosch Fire Monitoring System?

A modification of the sensor group icon is possible but requires a different file naming than for detectors

This article explain what should be done if new detectors are added to the system. 

This article answer to the question: "Can a fire alarm have the same sound as the one for a fault?"

Panel controller displays can become de-calibrated, e.g. upon initial power-up followed by unintentional contact with the display or inaccurately touching the crosshairs.  It becomes noticeable after the panel controller has re-booted and does not respond properly to touch.

Follow this article and learn about the option which allows you to configure the color for each state & sensor in FSM

Live time event printing is supported. To enable it, add a xml file in program data folder with the name of the printer.

This article presents step by step how to configure the “E-Mail Sender” function in FSM.