Security: Access Control

Describes what the LpsSearch service is for.

Possible solution to transactions Not Displaying in AEC View Activity screen

How can I allow a cardholder to have more than one active badge in the system

This article explains whether a  D6686 be used to integrate a D6600 or D6100 with Readykey Pro

This is a procedure to create an audit log report to see who made changes to the system and exactly what changes they made

This article will provide the workflow for adding an additional reader board to the primary RS-485 bus of an Access Easy Controller system.

These are steps to assist with troubleshooting the AEC 2.1 time drifting.

Why doesn't the Assign Card dialog box open when entering cardholders in Access Professional Personnel Management?

This article provides the solution when the computer cannot access the AEC2.1 if the Lantronix device is on the same subnet as the AEC2.1.

Most AEC firmware versions (2.1.7.10c V1 and earlier) are not compatible with Internet Explorer versions 8 and up.  This may prevent the Card Administration screen from displaying the cardholders. This is a workaround for that issue

How is the Duress Alarm event generated in the Access Easy Controller?

Can I assign an Exit Door function type as a device in the Criteria configuration so that I can trigger a relay for Door Forced Open or Door Held Open?

How to set up Dual Factor Authentication (Card + Pin) APE