DIVAR IP AIO 7000 r2.5 (DIP-7GRSN-P6): Graphic & sound card Installation

[#1]

Possible causes and solution(s)

The parts included in the kit (DIP-7GRSN-P6) are the following:

• 1 x Graphics card for DIVAR IP all-in-one 7000 appliances
• 1 x Sound card for DIVAR IP all-in-one 7000 appliances
• 4 x Mini DisplayPort to DisplayPort adapter

The kit must contain the proper brackets for the low profile (2u) and normal mounting (3u).

• Causes

At first sight, you might think that the model is the correct one that shows in the Datasheet, but the Video card is smaller than the DIP Slot.

• Solution

Please note that it may be possible that:

• the Audio card comes with the normal mounting (3u) bracket preinstalled and the kit contains the low profile bracket
• while the Video card comes with the low profile preinstalled and the kit contains the normal mounting bracket

The video card model is the same for all types of sizes of DIP-7000 AIO.

Important Q&A:

1) Question Is it still necessary to move the jumper to disable the on-board VGA?

Answer: It is NOT necessary to move the jumper to disable the on-board VGA.

2) Question: Are BIOS changes also required?

Answer: No, as per BIOS specifications, the graphic priority should always be set to “off-board”. per default.

3) Question How can you mount the brackets?

Answer Only two screws need to be tightened.